Using The Door-Opening Mechanism Correctly - Miele KWT 6722 iG S Operating And Installation Instructions

Guide to the appliance
Using the door-opening mech-
anism correctly
The Push2open system on your wine
conditioning unit makes it easy to open
the appliance door. The appliance door
on your wine conditioning unit is sensit-
ive to pressure.
The Push2open system is deactivated
at the factory. The function has to be
activated by touching the On/Off
sensor once the appliance has been
installed in the niche (see "Switching
on and off").
Opening the appliance door

Risk of damage from incorrect
handling of the door-opening mech-
anism.
Obstructing the appliance door while
opening it, or pushing in or holding
onto the door-opening mechanism
while the door is closing, may cause
damage to the door-opening mech-
anism.
Do not handle the door-opening
mechanism in this way.
To bring the door-opening mechan-
ism into its original position if neces-
sary, remove the plug and reconnect
it again after 5 seconds.
18
 Press briefly against the top left-
hand side of the appliance door
and then release it. The door will then
open a little way automatically.
 Then pull the appliance door fully
open.
To protect against inadvertent open-
ing, if you do not pull the appliance
door open, it will close again by itself
after approximately 3 seconds.
Closing the appliance door
 Push the appliance door shut.
Please be aware that using magnets in
front of the wine conditioning unit door
can cause it to open by mistake. This
is caused by the door-closing mech-
anism on the wine conditioning unit.