Display Brightness - Miele KWT 6722 iG S Operating And Installation Instructions

Display brightness 
The display brightness can be adjusted
to suit lighting conditions in the room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Altering the display brightness
 Touch the settings sensor.
All symbols available for selection will
appear in the display and the  sym-
bol flashes.
 Touch the sensors for setting the
temperature ( or ) repeatedly until
the  symbol flashes.
 Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the  symbol lights up in the display.
Selecting further settings
 By touching the  or  sensor you
can now alter the brightness of the
display:
1: dimmest setting
2: medium setting
3: brightest setting.
 Touch the OK sensor to confirm your
selection.
The selected setting is applied, the
 symbol flashes.
 Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set-
tings mode automatically after ap-
proximately one minute.
25