General Characteristics - Cembre B-TC650-SC Operation And Maintenance Manual

1. GENERAL CHARACTERISTICS

Application range
Max. cutting diameter
Operating pressure
Dimensions (ref. to Fig. 5)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
ASC30-36
Input
Acoustic noise
(1)
L
pA
L
pCPeak
L
WA
Vibration
(2)
(1) Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
(2)
(Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1st Standards, and under operating conditions much more severe than those normally found.
5
B-TC650-SC B-TC650-SCE B-TC650-SCT B-TC650-SCA
mm (inches)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from a rapid
advancing speed of the ram to a slower, more powerful speed
V / Ah / Wh
kg (lbs)
type EU
27044000
V / Hz
W
dB (A)
dB (C)
dB (A)
m/s 2
suitable for cutting Copper, Aluminium
or telephone cables
65 (2-9/16")
700 (10,000)
503 x 464 x 105 (19.8 x 18.3 x 4.1)
7,7 (16.9)
18
-15 to +50 (+5 to +122)
AGIP ARNICA 32 or equivalents
maximum pressure valve
18 / 4.0 / 72
CB1840L (Li-Ion)
0,66 (1.45)
UK
27045000 27047000
220 - 240 / 50 - 60
85
73
94.5
79
0.575 max.
AUS/NZ USA/CAN
27046000
115 / 60