Table of Contents
Advertisement
Quick Links
See also:
Service Manual
OPERATION MANUAL
Serial Number
EK6IDLX, EK6IDCLX
GATOR
Battery-powered
®
Dieless Crimping Tool
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
52080021 REV5
© 2019 Greenlee Tools, Inc.
1/19
Advertisement
Table of Contents
Related Manuals for Greenlee GATOR EK6IDLX
Summary of Contents for Greenlee GATOR EK6IDLX
- Page 1 EK6IDLX, EK6IDCLX GATOR Battery-powered ® Dieless Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product at www.greenlee.com 52080021 REV5 © 2019 Greenlee Tools, Inc. 1/19...
-
Page 2: Table Of Contents
All specifications are nominal and may change as design This device complies with the RF exposure SAR improvements occur. Greenlee Tools, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. test exclusion requirements for portable devices, if a minimum separation distance is kept. -
Page 3: Important Safety Information
• Keep hands away from the crimp- ing tool head when crimping. Failure to observe these warnings could result in severe injury or death. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 4: Important Safety Information
Failure to observe this precaution may result in injury injury or property damage. and property damage. Note: Keep all decals clean and legible, and replace when necessary. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 5: Identification
Battery Charger ................ Read the instructions supplied with the battery charger ® ® Battery Technology ................MAKITA Lithium ion BL1815, BL1820, BL1830, BL1840, BL1850 MAKITA is a registered trademark of Makita Corporation. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 6: Operation
Circuit has become too hot Flashing light for 20 seconds Send tool in for service at end of cycle * Running the battery below 16 V can damage the battery. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... - Page 7 4. For a cUL or UL classified crimp, complete the number of crimps specified in the “Connector Table” in this manual. Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 8: Cul And Ul Classified Crimps
Dieless Battery-powered Crimping Tool cUL and UL Classified Crimps Crimps made with the Greenlee EK6IDLX and EK6IDCLX Refer to the “Connector Table” for the brand names Dieless Crimping Tools are cUL and UL classified on and model numbers of appropriate connectors and the standard concentric, compressed, or compact stranded number of crimps required. - Page 9 500 kcmil 535 kcmil YA38 500 kcmil X X X BCU, BBCU, BLU, BBLU-065 CS650, CL650, 500 kcmil X X X X X 535 kcmil 54122BS CS700, CL700 Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070...
-
Page 10: Lcd Screen
Tool deactivated Service necessary Real-time clock not found Bluetooth ® unit not found Pressure sensor not found Burst pressure exceeded Battery temperature too low Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070... -
Page 11: Maintenance
3. Inspect the rotation of the head assembly. Fully debris or hydraulic oil. retract the ram. The head should rotate no more than 360°. If damage is detected, contact Greenlee customer service at 800-435-0786 for warranty service or repair. After use: 1. -
Page 12: Troubleshooting
800-435-0786 for warranty service or repair. 4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070 USA Tel: 800-435-0786 Canada Tel: 800-435-0786 International Tel: +1-815-397-7070 ©2019 Greenlee Tools, Inc. • An ISO 9001 Company Fax: 800-451-2632 Fax: 800-524-2853 Fax: +1-815-397-9247 www.greenlee.com...