Installing The Motherboard - Supermicro P9DSU-C User Manual

Super
P9DSU-C Motherboard User's Manual

Installing the Motherboard

1. If applicable, install the I/O shield into the chassis. The chassis you are us-
ing may vary depending on the manufacturer, so please consult the chassis'
documentation for the location of mounting holes, etc.
2. Locate the mounting holes on the motherboard.
3. Locate the matching mounting holes on the chassis. Align the mounting holes
on the motherboard against the mounting holes on the chassis.
4. Install standoffs in the chassis as needed.
5. Install the motherboard into the chassis carefully to avoid damaging mother-
board components.
6. Using the Phillips screwdriver, insert a Pan head #6 screw into a mounting
hole on the motherboard and its matching mounting hole on the chassis.
7. Repeat Step 5 to insert #6 screws into all mounting holes.
8. Make sure that the motherboard is securely placed in the chassis.
Note: Images displayed are for illustration only. Your chassis or compo-
nents might look different from those shown in this manual.
Chassis
Motherboard
Chassis
2-6
Chassis
Motherboard
Chassis