Jumper Settings; Explanation Of Jumpers; Tpm Module Jumpers - Supermicro P9DSU-C User Manual

Super
P9DSU-C Motherboard User's Manual
2-8

Jumper Settings

Explanation of Jumpers

To modify the operation of the motherboard, jumpers can be used to choose between
optional settings. Jumpers create shorts between two pins to change the function
of the connector. Pin 1 is identified with a square solder pad on the printed circuit
board. See the motherboard layout pages for jumper locations.
Note: On two-pin jumpers, "Closed" means the jumper is on and
"Open" means the jumper is off the pins.

TPM Module Jumpers

In order to use a TPM module, please the follow these jumper settings. Leave the
jumper headers on J1_FSI_CP0 and J1_FSI_CP1 off when TPM devices are not
installed. When a TPM module is not installed, place the header on pins 2-3. See
the table below for more information.
TPM Module
Jumper Settings
Pin# Definitions
Off With TPM Installed
2-3 Without TM Module
P9DSU-C
REV:1.10
2-32
1. J1_FSI_CP0
2. J1_FSI_CP1