Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive into the solid-state drive
slot on the system board.
2. Replace the screw (M2x2.5) that secures the solid-state drive to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
18
Removing and installing components
After working inside your
computer.
Before working inside your
computer.