Steps
1. Align and place the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
3. Adhere the mylar tape that secures the heat sink to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Fan
Removing the fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image indicates the location of fan and provides a visual representation of the removal procedure.
22
Removing and installing components
After working inside your
computer.
Before working inside your
computer.