Dell Inspiron 5391 Service Manual page 38

Steps
1. Align and place the palm-rest and keyboard assembly on the display assembly.
2. Using the alignment posts, close the display hinges.
3. Replace the two screws (M2.5x3.5) that secures the left display hinge to the I/O board and palm-rest and keyboard assembly.
4. Replace the screw (M2x4) that secures the right display hinge to the system board.
5. Connect the display cable on to the connector on the system board.
6. Align and place the display-cable bracket on the display cable.
7. Replace the screw (M2x4) that secures the display-cable bracket to the system board.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
38 Removing and installing components