Display Assembly; Removing The Display Assembly - Dell Inspiron 5391 Service Manual

Steps
1. Connect the power-adapter port cable to the system board.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
3. Align and place the display-cable bracket on the system board.
4. Replace the screw (M2.5x3.5) that secure the display-cable bracket to the system board.
5. Using the alignment posts, close the display hinges.
6. Replace the screw (M2x4) that secure the right display hinge to the system board.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

Display assembly

Removing the display assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
About this task
The following image indicates the location of display assembly and provides a visual representation of the removal procedure.
34 Removing and installing components
After working inside your computer.
Before working inside your computer.