Sullair DR13 125H Operator's Manual And Parts List page 36

Section 7
MAINTENANCE
Figure 7-4 Solenoid Valve (P/N 250025-516)
**
**
**
**
*
*
**
*
*
*
*Replacement Valve P/N 02250053-334
**Replacement Coil P/N 250031-431
circuit. Place an insulating washer at each end of
the non- - molded coil.
VALVE DISASSEMBLY MAINTENANCE
Turn off all power, relieve line pressure, and dis-
connect coil lead wires to the valve before making
repairs.
1. Remove retaining clip and pull entire solenoid en-
closure off solenoid base sub--assembly.
30
* *
*
WARNING
!
**
*
*
*
*
*
*
*
When metal retaining clip disengages it will spring
upward.
2. Unscrew solenoid base sub--assembly and re-
move core spring guide and core spring.
3. Unscrew capscrews (4) and remove end cap and
end cap gasket from body.
4. Pull inner disc sub--assembly, disc spring, sleeve
and outer disc sub--assembly from valve body.
Remove sleeve spring, core and bonnet gasket.
5. If cleaning is all that is required, do not remove
body (exhaust) seat, body seat gasket, end cap
*
*
CAUTION
!