Juniper QFX5220-128C Quick Start Manual page 11

Do not work on the switch or connect or disconnect cables during electrical storms
Before working on equipment that is connected to power lines, remove jewelry, including rings, necklaces, and watches.
Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the
terminals.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
In the event of a hardware failure, please contact Juniper Networks, Inc. to obtain a Return Material Authorization (RMA)
number. This number is used to track the returned material at the factory and to return repaired or new components to
the customer as needed.
For more information about return and repair policies, see the customer support Web page at
https://www.juniper.net/support/guidelines.html.
For product problems or technical support issues, contact the Juniper Networks Technical Assistance Center (JTAC) by
using the Case Manager link at
1-408-745-9500 (from outside the United States).
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the
United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the
property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Copyright © 2019
Juniper Networks, Inc. All rights reserved. Rev. 01, August 2019.
https://www.juniper.net/support/ or at 1-888-314-JTAC (within the United States) or
11