NEC N8551-28F Instruction Manual page 31

8
Confirm that [This wizard upgrades drivers for the following hardware device: SONY SDX-
500C SCSI Sequential Device] is displayed, and click the [Next] button.
The [Insert Disk] dialog box appears.
9
Click the [OK] button.
The driver is copied, then the [Files needs] dialog box appears.
10
Confirm that "A" is specified as the file copy source, and click the [Browse] button. Then
select sonyait2.sys, and click the [Open] button.
The screen returns to the [Files needs] dialog box.
11
Click the [OK] button.
The [Completing the Upgrade Device Driver Wizard] screen is displayed.
12
Click the [Finish] button.
Built-in AIT 13