Table of Contents
Advertisement
Organization of the Instruction Manual
The instruction manual function as a guide that enables you to set up and use the N8551-28F/
N8151-44F Built-In AIT correctly. You can refer to this manual whenever you encounter a
question or problem during setup and daily operation.
The instruction manual consists of two chapters: the first covers the considerations on the safe use
of the Built-In AIT (setup, daily operation and maintenance) and the second covers the considera-
tions on the safe use of the AIT data cartridge available on the Built-In AIT (operation and
maintenance).
Order of priority when the N8551-28F/N8151-44F Built-In AIT is
used for the first time
When the Built-In AIT is being used first time, refer to the instruction manual in the following
sequence to perform the setup after unpacking the driver.
1.
Check the contents in the package. ....................... Package Contents (→P. xv)
2.
Learn the operational precaution. ......................... Safety Consideration (→ P. iii)
3.
Learn the parts of the Built-In AIT ....................... Part Name and Function (→ P. 2)
4.
Set before installation. .......................................... Setup (→ P. 4 to 7)
5.
Install the driver in the basic processing unit. ....... Setup (→ P. 8 to 10)
6.
Install the tape driver.* .......................................... Installing the tape driver (→ P. 11 to P. 13)
7.
Learn how to handle the cartridge ......................... AIT Data Cartridge (→ P. 19)
8.
Set the cartridge. ................................................... Handling (→ P. 14)
9.
Check the LED indication. .................................... Handling (→ P. 16)
10. Clean the Built-In AIT. ......................................... Cleaning (→ P. 17)
* Required only when using Windows NT 4.0 NT backup, and Windows 2000 backup.
For details on data storage methods and settings, such as data save format, refer to
the instruction manual provided with the backup software.
xiii
Advertisement
Table of Contents
