Table of Contents
Advertisement
Positioning the pan support grids
The pan support grids are provided
unassembled on the hob. To position the
pan support grids correctly, follow the
instructions shown in figure.
Correct positioning of the flame-
spreader crowns and burner caps
Before lighting the hob burners, check that
the flame-spreader crowns are correctly in
place with their respective burner caps,
making sure that the holes (A) in the burners
are aligned with the igniters and
thermocouples (B).
Use
Practical tips for using the hob
For better burner efficiency and to minimise
gas consumption, use pans with lids and of
suitable size for the burner, so that the
flames do not reach up the sides of the pan.
Once the contents come to the boil, turn
down the flame far enough to ensure that
the liquid does not boil over.
Cookware diameters:
• AUX.: 12 - 16 cm.
• RR: 18 - 26 cm.
• UR2: 18 - 26 cm.
Cookware diameters with raised
pan support:
• UR2: 26 - 28 cm.
To prevent burns or damage to the hob or
the counter top during cooking, all pans or
griddles must be placed inside the
perimeter of the hob.
Always check that the knobs are in
the
have finished using the appliance.
(off) position when you
45
Advertisement
Table of Contents
