Launch Creader 5001 User Manual page 16

Creader 5001 English User's Manual
LAUNCH
This option retrieves and displays live data and parameters from the vehicle's ECU.
5. View Freeze Frame
When an emission-related fault occurs, certain vehicle conditions are recorded by the
on-board computer. This information is referred to as freeze frame data. Freeze Data is a
snapshot of the operating conditions at the time of an emission-related fault.
Note: if DTCs were erased, Freeze Data may not be stored in vehicle memory depending on vehicle.
6. O2 Sensor Test
This option allows retrieval and viewing of O2 sensor test results for most recently
performed tests from the vehicle's on-board computer.
7. On-board Monitoring
This function can be utilized to read the results of on-board diagnostic monitoring tests for
specific components/systems.
8. EVAP System
The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before
using the system test function, refer to the vehicle's service repair manual to determine the
procedures necessary to stop the test.
9. Vehicle Information
The option displays the Vehicle Identification Number (VIN), the Calibration Verification
Number (CVN), and other information of the test vehicle.
12