Delfield 4400P Series Installation, Operation And Maintenance Manual page 16

Installation
Heavy Duty Cutting Board Bracket Mounting Instructions
1. Attach each bracket to the top of the unit with one flat
head screw (9324092).
2. Attach each bracket to the face of the unit with one
fender washer (9324043) and one pan head screw
(9321519).
• Some adjustment to align the brackets may be
necessary once the cutting board is installed.
• Do not over tighten the screws.
16
Top
Face
3. Install the cutting board onto the brackets.
• Make final bracket adjustments so the cutting board
sits flush in the brackets.
• Tighten screws.
4. Silicone (9291311) each bracket anyplace it touches the
top or face of the unit. This prevents foreign objects
from getting between the brackets and the unit.
Section 2
Part Number: 9295093 12/18