Advertisement
standing height the light bar pulsates green until a
possible break. When the desk is placed back down
in the sitting position, the light bar pulsates green
until the reminder turns off again.
Without any action the light bar turns off after 4h.
When the DPG is tilted, the green light will come back
on.
Please note the DPG is no longer in ZERO mode
when the lightbar is activated for a reminder,
while the light is on.
Pulsating green light bar indicates everything is fine.
Pulsating orange light bar indicates the user needs to
change position.
FACTORY RESET
Pressing and holding the "Save" and "Reminder"
button for 8 seconds resets the DPG to factory
default.
The light bar flashes red three times. When a factory
reset is performed the DPG returns to the configured
state. The DPG configurator program is configured on
the basis of DPG configurator. This does not mean
that all set values in the DPG Configurator are reset -
only the settings that have been changed by the user
directly on the DPG or in the app are deleted.
ERROR CODES
The DPG1C displays error codes in case of system
errors. The most common error codes (EXX) and their
causes can be found in the chart below:
ERROR CODES
E53-E64
E41-E52
E01
GS Mark (Proven Safety)
CE conformance mark of the EU
Safety class II
Indoor use only
Not be treated as general
household waste
WEEE-Reg.-Nr.DE 63868279
CAUSE
Collision
Overload
Initialisation
Advertisement
