KIRAMI CUBE User Manual page 15

CUBE outside hot tub heater- Instruction manual
User manual
Kirami CUBE Outside hot tub heater
Contents:
• CUBE heater: marine aluminium (AlMg3)
• Fire grate: cast iron 2 pcs
• L-shaped grate 1 pcs
• Furnace door with steel plate inside
• Ø75mm rubber hoses for connecting the heater 2 pcs
Hose clamps Ø80-85mm 4 pcs
•
• Xylan Torx25 self drilling screws 6 pcs
• Torx 25 head for drill
• Ash shovel
• This user manual
Depending on the model of the heater (two or three connection pipes) are connection hoses
and possible connection plates delivered accordingly. Three pipe heaters area only delivered
as replacement for old heaters in old aluminium tubs. This manual does not include
instructions for those models. Also special models like left side version are not covered in this
manual.
Necessary tools
You will need a 13mm wrench or similar for fixing the heater to the barrel. And for installation
on a aluminum tub you also need a battery screwdriver where you can use the head
supplied.
Read this manual carefully and store for future reference.
NOTICE! Minimum water level before fire!
See page 19!
EN
Page 15/52
Updated 08/2013