CARE AND CLEANING
Cleaning the Blender
• Clean the Blender thoroughly after every use. Be sure to unplug before cleaning.
• To avoid damaging the Blender, do not immerse the Blender base or cord in water.
• To avoid scratching the Blender, do not use abrasive cleansers or scouring pads.
To clean the Blender base and cord:
Unplug the Blender before cleaning.
Wipe with a warm, damp cloth; wipe
clean with a damp cloth, and dry with
a soft cloth. Make sure to clean inside
the ingredient feed each time.
To clean pitcher, lid, ingredient cap, and funnel: Wash all items in the dishwasher
on the top or bottom rack. Or hand wash with soapy water, rinse, and wipe dry.
NOTE: For best results when cleaning the Blender, completely disassemble the lid,
ingredient cap and funnel and thoroughly wash all parts after each use.
To quickly clean the Blender while
in the base: Add 1 drop of dish soap
to half a pitcher of water, and run on
the Icy Drinks/Smoothies cycle. Discard
water when cycle is finished, and rinse