Table of Contents
Advertisement
Available languages
Available languages
Product Safety Information
Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Impact Wrench Product Safety Information Manual
Form 04580916.
Manuals can be downloaded from www.ingersollrandproducts.com.
Power Management System
For models that include a power management system, the system allows operator reduction
of maximum output power in the forward direction. The power management system does not
affect the output power in the reverse direction.
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specific power. The power
output can be further reduced in forward or reverse by using the variable throttle.
Product Specifications
Model
Style
2350XP
Pistol
Impacting Sound Level dB(A)
Model
† Pressure (L
2350XP
95.5
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 47132782 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
48622419_ed1
Drive
Type
Size
Square
1/2"
(ISO15744)
)
‡ Power (L
)
p
w
106.5
5. Hose diameter
6. Thread size
7. Coupling
8. Safety Air Fuse
Recommended Torque Range
Impacts
Forward
per min.
ft-lbs (Nm)
50-502[531 Max.]
1250
(68-680[720 Max.])
Free Speed Sound Level dB(A)
(ISO15744)
† Pressure (L
)
‡ Power (L
p
90.4
* K = Vibration measurement uncertanity
9.
10. Grease - during assembly
11. Grease - through fitting
Reverse
ft-lbs (Nm)
579[690 Max.]
(785[935 Max.])
Vibration (m/s²)
(ISO28927)
)
Level
w
101.4
13.3
Oil
EN
*K
4.6
EN-1
Advertisement
Table of Contents
