Multi-Trace Configurations - Agilent Technologies FieldFox N9923A Quick Reference Manual

Multi-Trace Configurations (NA Mode)
You can display multiple traces on the FieldFox screen.
The above image shows a 3-trace configuration. Tr1 is
the ACTIVE trace as indicated by the highlighted
annotation in the upper left corner.
The Frequency Range, IF BW, Resolution, and Output
power is common to all traces. All trace settings, such
as format, markers, and limit lines, are applied to the
ACTIVE trace in the same manner as when a single
trace is present.
To select a multi-trace configuration:
 Press Trace 6 then
 Then choose a multi-trace configuration.
To activate a trace in order to change a setting:
 Use the ▲|▼ arrows to scroll through the traces -
OR
 Press Trace 6 then select
Trace 3, or
can be activated.
By default with Multi-trace configurations, Markers
that are applied to one trace are applied to ALL traces.
Num Traces
Trace 4, Only traces that are shown
6
Trace 1, Trace
Tr1
2,