Save And Recall Files - Agilent Technologies FieldFox N9923A Quick Reference Manual

Save and Recall Files

Save current settings and calibration, trace data (CSV)
and .SNP), or a picture of the FieldFox screen.
Press Save/Recall 9
Select Device
1. Then
the file is to be saved. Choose from the following:
Internal

FieldFox internal memory.
 SD Card
SD card.
 USB
Saves/Recalls files to or from a USB Flash
drive.
File Type
2. Then
 State
and calibration for ALL Modes to an *.sta file.
 Trace + State
in SA mode) and instrument settings to an *.sta
file.
Picture

 Data (S1P)
an *.S1P file.
 Data (CSV)
mode to a *.csv file.
3. Then press
the specified device location.
Recall
4. Press
Saves/Recalls files to or from the
Saves/Recalls files to or from the mini
Saves ALL FieldFox instrument settings
Saves the current trace (all traces
Saves the FieldFox screen to a *.png file.
Saves CAT and NA Mode trace data to
(Data
Saves trace data from the current
Save
to save the specified file type to
to read an *.sta file into the FieldFox.
to set the LOCATION where
(S2P) for NA mode only.)
11