Description Of The Machine And Contents; Description Of The Machine (See Fig. 1); Installation And Running - Fieldmann FVC 8010 EC User Manual

Description of the machine and content of delivery | Installation and running
2. DESCRIPTION OF THE MACHINE AND
CONTENTS

Description of the machine (see Fig. 1)

1. Pump body
2. Pump handle
3. Infl ow opening
4. De-aerating closure
5. Infl ow opening
6. Outfl ow closure
7. Start/stop trigger
8. Power cord

3. INSTALLATION AND RUNNING

WARNING! Before starting the installation, carefully read the complete documentation.
The pump must not be used in swimming pools, ponds, water tanks where there are people, even after
pumping out hydrocarbons (fuel, diesel, heating oils, solvents) pursuant to the injury regulations valid for the
stated area.
Never touch the water when the plug is inserted into the socket even if the pump is not running. Before each
intervention, remove the plug from the electricity socket. Prevent dry running of the pump.
Protect the pump against atmospheric infl uences.
The pump is equipped with thermal engine protection. In the case of potential overloading of the engine,
the protection system automatically disconnects the pump. The time required for cooling the engine varies
between 15–20 minutes; after cooling, the pump is automatically activated.
After activating the protection system for the engine, it is necessary to identify and remove the reason.
Consult the paragraph "Identifying defects".
It is recommended to clean the pump before storing away. See the chapter "Maintenance and Cleaning".
Do not leave the pump running unattended.
GARDEN PUMP
Fig. 1
5 EN
USER MANUAL