Basic Operation Procedures; Get Vehicle Information; Wheel Alignment Checking; Adjustment - LAUNCH TECH LAUNCH KWA-300 Manual

LAUNCH
Basic
Procedures

Get Vehicle Information

Ask the owner for vehicle drivability problems,
symptoms, and wheel alignment history, and find
out vehicle information such as make, model and
year, etc.
Check each chassis part carefully, including rubber
boot, bearing, rock arm, tripod end, shock absorber,
tie rod end and steering mechanism, for any
looseness or wear. Then check to see if the tire
pressure, tire treads of the left and right wheels are
alike.

Wheel Alignment Checking

Perform the wheel alignment checking after the
initial condition is known.

Adjustment

If the measured values are not in accordance with
the specifications given in the databank, the wheel
alignment adjustment should be performed.

Test-drive

After finishing the wheel alignment, test the vehicle
to see if the abnormal conditions are eliminated.
Re-perform the wheel alignment if necessary.
KWA-300 3D Wireless Wheel Aligner
Operation
3-1

Basic Operation Procedures