Table of Contents
Advertisement
LAUNCH
Brake Pedal Depressor
KWA-300 3D has a brake pedal depressor as
shown in Fig.2.7. It is used to hold the brake pedal
down.
Fig.2.7 Brake pedal depressor
Wheel Clamp Tie
The wheel clamp tie is shown in Fig.2.8. It is used to
bind the wheel clamp to the wheel rim. The hooks of
the tie catch on the wheel rim to prevent the wheel
clamp from accidentally falling, which may damage
the target and wheel clamp.
Fig.2.8 wheel clamp tie
KWA-300 3D Wheel Aligner
2-3
Structures
Advertisement
Table of Contents
