Related Manuals for Ingersoll-Rand DG600G2 Series
Summary of Contents for Ingersoll-Rand DG600G2 Series
- Page 1 16574949 Edition 2 February 2014 Pencil Grinders DG600G2 Series Maintenance Information Save These Instructions...
- Page 2 Lubrication Whenever one of these Grinders is disassembled for overhaul or Inject 0.5 to 1 cc of Ingersoll Rand Lubricant No. 10 or a good replacement of parts, lubricate as follows: quality high-speed spindle oil into the Valve Body (6) after Always wipe the Blades (23) with a light film of the recommended assembly.
- Page 3 Assembly of the Motor Assembly of the Tool Assemble End Plate (24) to Rotor (22). Insert Motor Assembly with Air Block Assembly attached into Assemble Bearing (25) on Rotor. Housing (28). Using a special holding device clamp on Rotor and tighten Collet Assemble Throttle (12) to Valve Body.
- Page 4 © 2014 Ingersoll Rand...
Need help?
Do you have a question about the DG600G2 Series and is the answer not in the manual?
Questions and answers