Declaration Of Conformity And Installation - GEA InTouch HAX12P/60-4 Assembly Instructions Manual

10| Declaration of conformity and installation

DECLARATION OF CONFORMITY CE 09
for using the compressors within the European Union
(in accordance with Low Voltage Directive 2006/95/EC)
We hereby declare that the following refrigerating compressors
Product designation: HA12P
comply with the Low Voltage Directive 2006/95/EC.
Applied harmonised standard:
EN 60034-1, EN 60204-1
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(in accordance with Machinery Directive 2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
hereby declares that the refrigerating compressor HA12P complies with the basic requirements
D
of Appendix II 1B of the Machinery Directive 2006/42/EC.
GB
The following harmonised standards have been applied:
F
E
EN ISO 12100-1
EN ISO 12100-2
EN 12693
EN 349
A partly completed machine may only be put into operation when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulations of the Machinery Directive (2006/42/EC).
The manufacturer undertakes to transmit electronically the special documentation required by
individual states for partly completed machinery on request.
The special technical documentation required for partly completed machinery has been created
in accordance with Appendix VII Part B.
Person responsible for documentation is: Dr. Harald Kaiser, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 29.12.2009
24
72636 Frickenhausen, Tel.: 07022/9454-0
Dr. Harald Kaiser, Technical Director