Hach LANGE LOC 100 User Manual page 64

Safety information
Please read this entire manual before unpacking, setting up, or
operating this equipment. Pay attention to all danger and warning
statements. Failure to do so could result in serious injury to the operator
or damage to the instrument.
To make sure that the protection provided by this instrument is not
impaired, do not use or install this instrument in any manner other than
that specified in these operating instructions.
D A N G E R
Indicates a potentially or imminently hazardous situation that, if not avoided,
results in death or serious injury.
WA R N I N G
Indicates a potentially or imminently hazardous situation that, if not avoided, may
result in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
N O T I C E
Indicates a situation that, if not avoided, could result in damage to the instrument.
Information that requires special emphasis.
Note: Information that supplements points in the main text.
English 64
Warning signs
Read all labels and tags attached to the instrument. Failure to do so may
result in personal injury or damage to the instrument. If noted on the
instrument, corresponding symbols will be included in the relevant safety
information in the user manual.
This symbol may be noted on the instrument and refers to
operational and/or safety information in the user manual.
Electrical equipment marked with this symbol may not be disposed of
via European domestic or public disposal systems after 12 August
2005. In accordance with current regulations (EU Directive 2002/96/
EC), users within the EU must now return old electrical equipment to
the manufacturer for disposal The user bears no costs for this
process.
Note: Please contact the manufacturer or supplier for
instructions on how to return end-of-life equipment,
manufacturer-supplied electrical accessories and all auxiliary
items for proper disposal or recycling.
RFID module
RFID technology is a radio application. Radio applications are subject to
national conditions of authorization. The use of the LOC 100 is currently
permitted in the following countries: EU, Norway, Switzerland, Iceland,
Liechtenstein, Croatia, Turkey, USA, Canada, UAE, Australia and New
Zealand. The manufacturer advises that the use of the LOC 100 outside
of the above-mentioned regions may contravene national laws. The
manufacturer reserves the right also to obtain authorization in other
countries. In case of doubt, please contact the distributor.
The LOC 100 contains an RFID module to receive and transmit
information and data. The RFID module operates with a frequency of
13.56 MHz.