which do not support Plug and Play will require the system
resources to be registered.
There is a separate option for each resource; memory, I/O ports,
DMA channels and interrupts.
Some areas are shown as Allocated by the system and are only for your
information. Each resource can be set to either Available or Not available.
If shown as available, it is assumed by the system not to be in use by
any ISA card or device and therefore will be made available for the
PCI auto-configure process.
Although many ISA cards are very simple to configure, the resources
they use, if any, must be registered in the BIOS. See the chapter
entitled "Expansion Cards" for more information about the
resources used by expansion cards.
Any errors reported during the POST routine will be logged in the
Error log. It will contain the last three errors detected and can be
The power management features provided aim to reduce the average
amount of electricity consumed by your computer. The Power
Management is 'enabled' as default.
The monitor supplied with your computer is designed to work with these
energy-saving features. If you want to use another monitor, make sure
that it supports DPMS; if it does not, it may be permanently damaged.
Some features in the Power Management will have been enabled in
our factory to ensure compliance with the Energy Star Programme.
Refer to the pre-installed windows on-line help file for information
about the Energy Star Programme.
S y s t e m B I O S a n d S e t u p
LS/VS 550 OWNER'S HANDBOOK