Table of Contents
Advertisement
Declaration
of Conformity
Your attention is drawn to the following:
HCL warrants that a new HCL banding tool will operate per functional specifications for a period of sixty (60) days after the date of
shipment to the owners place of business. Normal wearing parts, as outlined in the Operations, Parts & Safety manual, are also covered
by a sixty (60) day warranty unless, in HCL's judgement, these parts have been subjected to abnormal or extreme usage. HCL's sole
liability hereunder will be to repair or replace, without charge, F.O.B. HCL, Bath UK, any tool which proves to not operate per functional
specifications within the stated period. HCL reserves the right to replace any tool which proves not to operate per functional specifications
with a new or like-new tool of the same model, if in HCL's judgement such replacement is appropriate. Any new replacement or like new
replacement tool provided to an owner will carry a full sixty (60) day warranty. Any warranty repaired tool will carry a warranty for the
balance of time remaining on the initial sixty (60) day warranty. This warranty will be extended to compensate for the time the tool is in
HCL's possession for warranty repairs.
This warranty is void as to any tool which has been:
a) subjected to mis-use, misapplication, accident damage, or repaired with other than genuine HCL replacement parts.
b) improperly maintained, or adjusted, or damaged in transit or handling.
c) used with improperly filtered, regulated, unlubricated air.
d) in HCL's opinion, altered in a way that affects or detracts from the performance of the tool.
HCL MAKES NO WARRANTY, EXPRESSED OR IMPLIED, RELATING TO MERCHANTABILITY, FITNESS OR OTHERWISE EXCEPT AS STATED
ABOVE AND HCL'S LIABILITY AS ASSUMED ABOVE IS IN LIEU OF ALL OTHERS ARISING OUT OF OR IN CONNECTION WITH THE USE
AND PERFORMANCE OF THE TOOL. IT IS EXPRESSLY UNDERSTOOD THAT HCL SHALL IN NO EVENT BE LIABLE FOR ANY INDIRECT OR
CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH MAY ARISE FROM LOSS OF ANTICIPATED PROFITS OR
PRODUCTION, SPOILAGE OF MATERIALS, INCREASED COSTS OF OPERATION OR OTHERWISE.
Considerable effort has been made to ensure that this product conforms to our high quality standards. However, should you
experience any difficulties, please contact your Sales representative providing samples and the serial code specified on the tool.
HCL Fasteners Limited, Registered Office: First Avenue, Westfield Industrial Estate, Radstock, Bath, BA3 4BS United Kingdom.
Name of manufacturer:
Address of manufacturer: First Avenue, Westfield Industrial Estate, Radstock, Bath BA3 4BS, UK
Telephone:
Email
I hereby declare that the following machinery complies with all the Essential Health and Safety
Requirements of the Machinery Directive 89/392/EEC as amended.
Machinery description:
Type:
Serial No:
Transposed Harmonised European Standards used:
BS EN 12100 – 1&2:2003
prEN 983
EN 349 : 1993
BS EN 792-10
Tel: +44 (0)1761 417714 Fax: +44 (0)1761 417710 www.hclfasteners.com
HCL Fasteners Ltd
+44 (0)1761 417714
sales@hclfasteners.co.uk
Banding tool for tensioning the HCL Smart Band® 32 mm (1¼"),
25mm (1"), 19mm (¾") or Smart Tie™ 20mm (¾") Systems
Banding Tool SM-FT-1000
Safety of Machinery – Basic concepts, general principles for design
Safety requirements for fluid power systems and components –
Pneumatics
Safety of Machinery – Minimum gaps to avoid crushing of parts of the
human body
Hand-held non-electric power tools – Safety requirements – Part 14:
Compression power tools
Advertisement
Table of Contents
