Table of Contents
Advertisement
3
Using the remote control
Learning about the remote control
The buttons used for operating the TV only are described here. For a complete list
of the remote control's functions, see the remote control functional key chart on
pages 28–29.
turns the TV on and off
POWER
accesses the sleep timer (page 82)
SLEEP
The first press of the LIGHT button lights the keypad and turns on the
LIGHT
Illumination mode. With the Illumination mode on, pressing any other key lights the
keypad for 5 seconds (10 seconds if you're in programming mode). Subsequent presses
of the LIGHT button toggle between turning the Illumination mode on and off.
directly access channels (page 42)
Channel Numbers (0–9, 100)
cycles through the six device modes: TV, CABLE/SAT, VCR, DVD, AUDIO1,
MODE
and AUDIO2. The mode indicator light will remain lit for a few seconds (page 27).
cycles through the five pictures sizes: Natural, Theater Wide 1/2/3, and Full
PIC SIZE
(page 64)
accesses the on-screen IR device control icons (page 46)
THEATER NET
accesses the menu system (page 35)
MENU
opens the TV Guide On Screen system (page 53)
GUIDE
provides detailed information on highlighted items in the TV Guide On Screen
INFO
system (page 56)
select menu-specific functions in the TV Guide On Screen
BLUE and GREEN buttons
system (page 55)
activates highlighted items in the main menu system and the TV Guide
ENTER
On Screen system
select or adjust programming menus
yz x •
accesses the favorite channel search function (page 44)
FAV
cycles through programmed channels when no menu is on-screen (page 42);
CH yz
functions as page up/down when a menu is on-screen or when the TV Guide
On Screen system is open (page 53)
adjusts the volume level
VOL yz
closes on-screen menus and the TV Guide On Screen system
EXIT
returns to the last viewed channel (page 63)
CH RTN
selects the video input source (page 61)
INPUT
displays TV setting information on-screen (page 83)
RECALL
reduces or turns off the sound (page 76)
MUTE
press to select TV mode to view one program while recording another
TV/VCR
turns the POP feature on and off (page 68)
SPLIT
selects the POP (picture-out-picture) channel (page 68)
POP CH yz
allows direct access to POP channels (page 68)
POP DIRECT CH
freezes the main picture in the double-window (page 69)
FREEZE
switches the main and POP pictures (page 69)
SWAP
allows access to the programmed channel search function (page 70)
CH SCAN
selects the POP picture source (page 68)
SOURCE
26
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
+10
–
100
ACTION
MENU
THEATER
NET
ENTER
+
VCR
REC
POP CH
SPLIT POP DIRECT CH FREEZE
SWAP
CH SCAN
SOURCE
CT-90168
Note:
The error message "Not Available" will
appear if you press a key for a function
that is not available.
Advertisement
Table of Contents
