Connecting A Digital Audio System; Connecting An Analog Audio System - Toshiba 51HX93 Owner's Manual

Connecting a digital audio system

The TV's DIGITAL AUDIO OUT jack outputs a
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby Digital
decoder or other external audio system with optical audio input.
You will need:
one optical audio cable
To control the audio:
Turn on the TV and the digital audio device.
Press MENU on the TV's remote control and open the AUDIO
menu.
Highlight AUDIO SETUP and press ENTER.
In the OPTICAL OUTPUT FORMAT field, select either
DOLBY DIGITAL or PCM, depending on your device (see
"Selecting the optical audio output format" on page 79).
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Turn off the TV's built-in speakers (in the same AUDIO
SETUP menu, above; also see "Turning off the built-in
speakers" on page 79).
Or you can use the TV's built-in speakers as center channel
speakers by following the connection instructions on page 20.

Connecting an analog audio system

This connection allows you to use external speakers with an
external audio amplifier to adjust the sound level.
You will need:
one pair of standard audio cables
To control the audio:
Turn on the TV and the stereo amplifier.
Turn off the TV's built-in speakers (see "Turning off the built-in
speakers" on page 79).
Note: To hear sound when using an external audio amplifier,
the volume of both the TV and the amplifier must be set to a
reasonable listening level.
Chapter 2: Connecting your TV
Audio Setup
MTS
Stereo
Language English
Speakers
On
Audio Out Main
Optical Output Format Dolby Digital
Save Done Reset
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Dolby Digital decoder or
other digital audio system
LINE IN Optical IN
L R
TV
ANT( 75 )
Optical Audio
G-LINK DVI/HDCP IN
ANT-1 ANT-2
REC OUT
VIDEO L R
AUDIO
IN
COLOR COLOR
VIDEO 1 VIDEO 2
STREAM STREAM
HD-1 HD-2
Y Y
AUDIO
S-VIDEO
R L
P P
B B
OUT
VIDEO
P P
R R VIDEO
L/ L/
MONO MONO
L L
AUDIO AUDIO AUDIO
AUDIO
R R R R
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level, which may damage
speakers or headphones.
• The DIGITAL AUDIO OUT jack may not output some
digital audio sources because of copy restrictions.
Analog audio amplifier
LINE IN
L R
TV
ANT( 75 )
G-LINK
ANT-1 ANT-2
REC OUT
VIDEO L R
AUDIO
IN
COLOR COLOR
VIDEO 1 VIDEO 2
STREAM STREAM
HD-1 HD-2
Y Y
S-VIDEO
R
P P
B B
OUT
VIDEO
P P
R R VIDEO
L/ L/
MONO MONO
L L
AUDIO AUDIO AUDIO AUDIO
R R R R
TheaterNet
IN
IEEE1394
1
IEEE1394
2
DIGITAL
AUDIO OUT
AUDIO CENTER
CHANNEL IN
L TheaterNet
VAR
AUDIO
ON OFF
R
IR OUT
DVI/HDCP IN TheaterNet
IEEE1394
1
IEEE1394
2
DIGITAL
AUDIO OUT
AUDIO
L
AUDIO CENTER
CHANNEL IN
TheaterNet
L
VAR
AUDIO
ON OFF
R
IR OUT
19