Scrolling The Theater Wide Picture; Using The Auto Aspect Feature (480I Signals Only) - Toshiba 51HX93 Owner's Manual

Scrolling the Theater Wide picture

(Theater Wide 2 and 3 only)
You can set separate scroll settings for Theater Wide 2 and
Theater Wide 3 modes.
To set the scroll settings:
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. In the PICTURE SIZE field, select either Theater Wide 2
or Theater Wide 3 (you cannot scroll in any other mode).
4. Press z to highlight the PICTURE SCROLL field.
5. Pressx or • to scroll the picture as needed, from –10
to +20.
Theater Settings
Picture Size Theater Wide 2
0
Picture Scroll
Cinema Mode Video
Display Format
1080i
Auto Aspect Ratio
On
Save Done Reset
6. To save your scroll settings temporarily, highlight DONE
and press ENTER.
To save your scroll settings permanently, highlight SAVE
and press ENTER.
66
Chapter 8: Using the TV's features
Theater Settings
Picture Size Theater Wide 2
-10
Picture Scroll
Cinema Mode Video
Display Format
1080i
Auto Aspect Ratio
On
Save Done Reset
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Using the auto aspect ratio feature
(480i signals only)
When the AUTO ASPECT feature is set to ON and the TV
receives a 480i signal, the picture size is automatically selected,
as described in the following table.
Automatic aspect size
Aspect ratio
of signal source
when AUTO ASPECT is ON)
4:3
16:9
Not defined User-selected picture size
(no ID-1 data)
Note:
• The AUTO ASPECT feature applies to 480i signals received from the
VIDEO 1, VIDEO 2, VIDEO 3, or ColorStream HD1/HD2 input sources
only, and is not applicable to antenna, Cable, or DVI input sources.
• The AUTO ASPECT feature is not available when the POP
double-window is open.
To turn on the AUTO ASPECT feature:
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. In the AUTO ASPECT RATIO field, select ON.
4. To save your settings temporarily, highlight DONE and
press ENTER.
To save your settings permanently, highlight SAVE and
press ENTER.
Theater Settings
Picture Size
Natural
Picture Scroll 0
Cinema Mode Video
Display Format 1080i
Auto Aspect Ratio On
Save Done Reset
To turn off the AUTO ASPECT feature:
Select OFF in step 3 above.
(automatically selected
Theater Wide 2
Full
(see pages 64–65)