Connecting A Vcr And Cable Box - Toshiba 51HX93 Owner's Manual

Connecting a VCR and Cable box

You will need:
one Cable signal splitter
five coaxial cables
one set of standard A/V cables
• For better picture performance from your VCR: If your VCR has
S-video, connect an S-video cable (plus the audio cables) instead
of the standard video cable. Do not connect an S-video cable and a
standard video cable to VIDEO 1 (or VIDEO 2) at the same time
or the picture performance will be unacceptable.
• If you have a mono VCR, connect L/MONO on the TV to your
VCR's audio out jack using the white audio cable only.
• For better picture performance from your Cable box: If your Cable
box has component video, you can connect component video
cables (plus the audio cables) instead of the standard video cable
from the Cable box to the ColorStream HD-1 inputs on the TV. You
would then select ColorStream HD-1 as the video input source. *
• When you use a Cable box, you may not be able to use the
remote control to program or access certain features on
the TV.
To view basic Cable channels and use the TV's features:
Select the ANT 2 video input source.* Use the TV front
panel controls or remote control to change channels and
access the TV's features.
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT 1 video input source.*
Tune the TV to channel 3 or 4 (whichever channel is vacant
in your area). Use the Cable box controls to change
channels.
or...Turn ON the VCR. Tune the VCR to channel 3 or 4
(whichever channel is vacant in your area). Select the
VIDEO 1 video input source.* Use the Cable box controls
to change channels.
To view the VCR:
Select the VIDEO 1 video input source.*
Note: This will provide better picture performance if you
connected an S-video cable as mentioned in the first bulleted
item on this page.
or...Turn ON the VCR. Select the ANT 1 video input source.*
Tune the TV to channel 3 or 4 (whichever channel is vacant
in your area).
_____________
*
To select the video input source, press INPUT on the remote control
(see page 61). To program the TV remote control to operate other
devices, see pages 30–33.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
Chapter 2: Connecting your TV
Connect
the G-LINK
cable to the
G-LINK jack
(see page 25)
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Cable box Cable splitter
IN OUT
CH 3
OUT
CH 4
Stereo VCR
IN from ANT
CH 3
CH 4
OUT to TV
TV
)
ANT( 75
G-LINK
ANT-1 ANT-2
REC OUT
VIDEO L R
AUDIO
IN
COLOR COLOR
VIDEO 1 VIDEO 2
STREAM STREAM
HD-1 HD-2
Y Y
AUDIO
S-VIDEO
R
P P
B B
OUT
VIDEO
P P
R R VIDEO
L/ L/
MONO MONO
L L
AUDIO AUDIO AUDIO
AUDIO
R R R R
From Cable TV
IN
OUT
VIDEO AUDIO
L R
IN
OUT
L R
DVI/HDCP IN TheaterNet
IEEE1394
1
IEEE1394
2
DIGITAL
AUDIO OUT
L
AUDIO CENTER
CHANNEL IN
L TheaterNet
VAR
AUDIO
ON OFF
R
IR OUT
13