Formatting Storage Media; Deactivating Storage Media; Recording Profiles - Bosch MIC IP fusion 9000i Operation Manual

MIC IP fusion 9000i
1.
2.
3.
6.2.4

Formatting storage media

All recordings on a storage medium can be deleted at any time. Check the recordings before
deleting and back-up important sequences on the computer's hard drive.
1.
2.
3.
4.
6.2.5

Deactivating storage media

A storage medium in the Managed storage media list can be deactivated. It is then no longer
used for recordings.
1.
2.
6.3

Recording Profiles

A recording profile contains the characteristics of the tracks that are used for recording. These
characteristics can be defined for ten different profiles. The profiles can then be assigned to
days or times of day on the Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be changed on the Recording
Scheduler page.
To configure a profile, click its tab to open its settings page.
–
–
–
Stream profile settings
Select the encoder profile setting that is to be used with stream 1 and 2 when recording. This
selection is independent of the selection for live stream transmission. (The properties of the
encoder profiles are defined on the Encoder Profile page.)
Pre-position
Select the appropriate pre-position to record. Options are Tour A, Tour B, Custom Tour, and
configured pre-positions.
Recording includes
You can specify whether, in addition to video data and metadata (for example alarms, VCA
data and serial data) should also be recorded. Including metadata could make subsequent
searches of recordings easier but it requires additional memory capacity.
Bosch Security Systems
In the Storage overview section, double-click a storage medium, an iSCSI LUN or one of
the other available drives.
– The medium is added as a target in the Managed storage media list.
– Newly added media is shown as Not active in the Status column.
Click Set to activate all media in the Managed storage media list.
– The Status column shows all media as Online.
Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to be
recorded on the target selected.
Click a storage medium in the Managed storage media list to select it.
Click Edit below the list.
Click Format in the new window to delete all recordings in the storage medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list to select it.
Click Remove below the list. The storage medium is deactivated and removed from the
list.
To copy the currently visible settings to other profiles, click Copy Settings. A window
opens to select the target profiles for the copied settings.
If you change a profile's settings, click Set to save.
If necessary, click Default to return all settings to their factory defaults.
Operation Manual
Recording | en 39
2019-11 | 1.2 |