Bosch MIC IP fusion 9000i Operation Manual page 37

MIC IP fusion 9000i
For MIC7000 cameras controlled by Pelco controller keyboards, users can remap a total of 8
common control commands to Pelco AUX commands. To accomplish this, a third-party serial
protocol license is required.
Scene 99
Select Scan 360° or Auto pan.
Pelco AUX number
Select a Pelco AUX number field to map, and then select the appropriate command from the
drop-down list.
AUX Command
Wash/wipe
Wiper one shot
Wiper continuous
Wiper intermittent
IR mode
BLC
AGC
Night mode
Night mode auto
Alarm output 1
Alarm output 2
Alarm output 3
Alarm output 4
White light
Intelligent defog
Intelligent tracking
Serial mode
Select Simplex or Full-duplex.
Bosch Security Systems Operation Manual
Camera | en 37
2019-11 | 1.2 |