Playback; Selecting The Recording Stream; Searching For Recorded Video; Exporting Recorded Video - Bosch MIC IP fusion 9000i Operation Manual

MIC IP fusion 9000i
10.2

Playback

10.2.1

Selecting the recording stream

On the left side of the browser, expand the Connection group if necessary.
To view a recording stream:
1.
2.
10.2.2

Searching for recorded video

On the left side of the browser, expand the Search group if necessary.
1.
2.
3.
4.
5.
6.
10.2.3

Exporting recorded video

On the left side of the browser, expand the Export group if necessary.
1.
2.
3.
4.
5.
Note:
The target server address is set on the Network / Accounts page.
10.2.4

Controlling playback

The time bar below the video image allows quick orientation. The time interval associated with
the sequence is displayed in the bar in gray. Arrows indicate the position of the image
currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
–
–
–
Controls
Control playback by means of the buttons below the video image.
The buttons have the following functions:
–
–
–
10.3

Dashboard

The Dashboard page shows information on 4 topics:
–
–
Bosch Security Systems
Click the Recording drop-down arrow to see the options.
Select recording stream 1 or 2.
To limit the search to a particular time range, enter the date and times for the start and
stop points.
Select an option from the drop-down box to define a search parameter.
Click Search.
The results are shown.
Click a result to play it back.
Click Back to define a new search.
Select a track in the track list or in the search results.
The start and stop date and time are filled-in for the selected track. If required, change
the times.
In the Time lapse drop-down box, select the original or a condensed speed.
In the Location drop-down box, select a target.
Click Export to save the video track.
If required, click in the bar at the point in time at which the playback should begin.
Change the time interval displayed by clicking the plus or minus icons or use the mouse
scroll wheel. The display can span a range from six months to one minute.
Click the alarm jump buttons to go from one alarm event to the next or to the previous
one. Red bars indicate the points in time where alarms were triggered.
Start/Pause playback
Select the playback (forward or backward) speed using the speed regulator
Step forward or backward frame-by-frame when paused (small arrows)
Device status
Recording status
Operation Manual
Operation via the browser | en
2019-11 | 1.2 |
65