Advertisement
Step 6. Remove the right side cover and the front cover in the direction of the arrow, respectively.
Step 7. Connect the FPC cable to the wireless LAN module in the correct orientation.
Two FPC cables are supplied with the wireless LAN kit. One is designed for the B-EP2DL series, and
the other is for the B-EP4DL series. Do not mistake them for each other.
NOTE: Pass the FPC cable, Ground Wire and Power Cable through the slot, as shown in the picture below.
(B-EP4DL series only)
Connector
FPC Cable
Step 8. Secure the ground wire with the Tapping screw (T-2x6) which secures the driver PC board.
T-2x6 Tapping Screw
B-EP4DL
Ground Wire
Right Side Cover
Wireless LAN Module
Driver PC Board
Front Cover
Power Cable
T-2x6 Tapping Screw
B-EP2DL
Ground Wire
3/8
Slot
Ground
wire
FPC
Cable
Driver PC Board
Advertisement
