Advertisement
B-EP2DL Series: Fit the tabs A to C into the slot A' to C'.
Tab C
NOTE: It is easy to mount the right side cover if you fit the tabs from the LCD side in order, then secure the bottom side.
Be careful not to catch the cable by the cover while reassembling.
Step14. Close the top cover and load the battery pack.
Step15. Attach the supplied Standard Label to the following position.
B-EP4DL Series
Step16: Configure the wireless LAN module settings in the system mode with reference to the B-EP Setting Tool
Operation Manual and the Key Operation Specification or the Service Manual.
Be sure to set a country code in accordance with the location of use. Use of a wireless LAN module with
a wrong country code could violate each country's law, and violators could be subject to penalties.
For how to set a country code, refer to the B-EP Setting Tool Operation Manual.
Tab B
Standard Label
Tab A
A'
B-EP2DL Series
7/8
B'
Right Side Cover
Standard Label
C'
Advertisement
