Connecting A Cable Converter Box; Connecting A Cable Converter Box And Vcr - Toshiba 36AF12 Owner's Manual

Connecting a cable converter box

This connection allows you to watch basic and premium cable
channels. To use the TV features (such as PIP swap, channel
channel block, favorite channels, or channel labels ), select ANT-1. To
view premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• three coaxial cables (one or more may be provided by your cable
company)
From Cable
ANT (75Ω)
NT-1 OUT NT-2
OUT DVD IN
COLOR
STRE M
Y
INPUT
VIDEO
Pb
L/MONO L
UDIO UDIO
Pr
R R

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video1 (see "Selecting the signal source" on page 17). Tune the
VCR to channel 3 or 4 (the same channel as the converter box output
switch), and use the cable converter box to change channels. Set the
PIP source to "TV" (see page 28).
You will need:
• five coaxial cables (one or more may be provided by your cable
company)
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
• one cable splitter
TV
ANT (75Ω)
ANT-1 OUT ANT-2
OUT DVD IN
COLOR
STREAM
Y
INPUT
VIDEO
Pb
L/MONO
L
AUDIO
AUDIO
Pr
R R
Stereo VCR
VIDEO AUDIO
L R
y z
IN
OUT
IN
S-VIDEO
VIDEO
Cable
L/MONO
Converter
Box
UDIO
R
VIDEO 2 VIDEO 1
OUT
Cable
Signal
OUT
Splitter
IN
S-VIDEO
VIDEO
L/MONO
AUDIO
R
VIDEO 2 VIDEO 1
IN
Cable
OUT
Converter Box
IN
IN from ANT OUT to TV
CH 3
OUT
CH 4
8
Note:
, When you use a converter box with your TV,
the remote control may not operate certain
features, such as PIP swap, channel y z,
channel block, favorite channels, or channel
labels.
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Note:
From Cable
When you use a converter box with your
TV, the remote control may not operate
IN
certain features, such as PIP swap,
channel y z, channel block, favorite
channels, or channel labels.
If you have a mono VCR, connect
L/Mono to VCR Audio OUT using only
one audio cable.
If you have an S-VHS VCR, use an
S-video cable instead of a standard video
cable.
Do not connect a standard video cable
and an S-video cable to Video-1 (or
Video-2) at the same time or the picture
performance will be unacceptable.