Selecting The Signal Source; Programming Channels Into The Tv's Memory; Programming Channels Automatically - Toshiba 36AF12 Owner's Manual

Selecting the signal source

To select the signal source to view:
Repeatedly press TV/VIDEO on either the remote control or the
TV.
TV
VIDEO 1
VIDEO 2
VIDEO 3
ColorStream
TO SELECT PUSH TV/VIDEO
Pressing TV/VIDEO
on the remote control
To display the current signal source:
Press RECALL.

Programming channels into the TV's memory

When you press CHANNEL ▲▼
the TV stops only on the channels stored in the TV's memory.
Note: To tune the TV to a channel not programmed into the memory,
use the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV's memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and
store them in the TV's memory. After the channels are stored auto-
matically, you can manually add or erase individual channels (see page
18).
If you use both ANT-1 and ANT-2 terminals, you will need to
program channels for each signal source.
To program channels automatically:
1. Press MENU.
2. Press or to highlight the SET UP menu.
x •
3. Press or to highlight TV/CABLE.
y z
4. Press or to highlight TV (if you use an antenna) or CABLE (if
x •
you use cable).
5. Press to highlight CH PROGRAM.
z
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
ANT1/2: [ANT1] ANT2
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
MORE
SELECT [ ]
MOVE [ ]
6. Press or to start automatic channel programming ("CH
x •
PROGRAM" displays on-screen). The TV automatically cycles
through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV's memory.
7. When automatic channel programming is complete, the message
"CH Programming Completed" appears.
8. Press CHANNEL ▲▼ to view the programmed channels.
VIDEO 1
VIDEO 2 ANT 1
VIDEO 3
ColorStream ANT 2
TO SELECT PUSH TV/VIDEO
Pressing TV/VIDEO
on the TV
on the TV or remote control,
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
ANT1/2: [ANT1] ANT2
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
MORE
MOVE [ ] SELECT [ ]
17
Channel
TV/Video
DEMO MENU TV/VIDEO VOLUME CHANNEL
Menu
RECALL POWER
LIGHT
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
TV/VIDEO
2
1 3
CH CH (Channel)
4 5 6
Channel
Numbers
8 9
7
VOL
CH RTN
100 ENT
0
ADV/
PIP CH MENU
FAV ENTER FAV
ADV/
PIP CH
POWER