Maintenance And Repair; Cleaning And Care; Inspection And Maintenance - Bosch Rexroth M SE 6 XD Series Operating Instructions Manual

Directional seat valves, direct operated, with solenoid actuation
Table of Contents

Advertisement

40/52

Maintenance and repair

Bosch Rexroth AG, M-.SE 6 ...XD..., RE22047-XD-B/02.19
10 Maintenance and repair

10.1 Cleaning and care

Penetrating dirt and fluids will cause faults!
When dirt and fluids penetrate, safe function is no longer ensured.
Always ensure absolute cleanliness when working at the valve.
Solvents and aggressive cleaning agents!
Aggressive cleaning agents may damage the seals and the surface of the valve and
let them age faster.
Do not use solvents or aggressive cleaning agents.
Damage to the hydraulic system and seals!
A high-pressure washer's water pressure could damage the hydraulic system and
the seals of the valve. The water displaces the hydraulic fluid from the hydraulic
system and seals.
Do not use a high-pressure washer for cleaning.
For cleaning and care of the valve, observe the following:
Close all openings with appropriate protective caps/devices.
Check that all seals and caps of the plug-in connections are firmly fitted so that
no humidity can penetrate the valve during cleaning.
Remove external coarse dirt and keep sensitive and important parts like valve
solenoids clean.
Remove dust and dirt accumulations on the valve at regular intervals.

10.2 Inspection and maintenance

Uncontrolled machine movements!
Risk of injury due to maintenance work at an activated machine.
Unless expressly prescribed otherwise, deactivate the machine via the main
switch, lock it and remove the key before carrying out works.
The following inspection, testing and maintenance works are to be carried out
regularly. The intervals for the same have to be selected in a way - also dependent on
the operating conditions - that deficiencies that have to be anticipated are identified
timely. The check must, however, at least be carried out every three years from the
date of manufacture of the valve. The date of manufacture of the valve can be seen
on the name plate, see chapter 5.1.1 "Information on the name plate and the valve
solenoid housing".
NOTICE
WARNING

Advertisement

Table of Contents
loading

Table of Contents