Vega Absolute M-BUS-1 User Manual page 23

M-BUS-1 / User Manual
Uplink number of transmission (not displayed in the "Simple" mode) – if the "Confirmed
uplinks" function is disabled, the device will simply send each packet as many times as specified
in this option. If "Confirmed uplinks" is enabled, the device will send packets until it receives a
confirmation or until it sends as many packets as specified in this option.
TX power (not displayed in the "Simple" mode) – the device RF transmitter power is
adjusted to this value when sending packets to the LoRaWAN network. This option can be
changed by the network server.
Revision 10 27 May 2019
-
23