Televes T.OX Series Quick Installation Manual page 5

The Status > Summary page should appear as the first page.
This provides a summary of all the units installed in the network and the
units will be sorted by the number entered in Step 5.
The "Change Password" option only changes the password of the encoder
currently logged in to. To change the password for the remaining modules,
each one will need to be logged into with its unique IP address and the
change made for each.
- Status > Summary tab.
Figure 7
Figure 8 shows an example of a detailed status page.
- Status > Detailed tab.
Figure 8
9.
Configure all units:
Select "CONFIGURATION". This page has 4 options, INPUT, TRANSPORT,
OUTPUT, and NETWORK, shown in Figures 9, 10, 11, and 12 respectively.
For each configuration page, the last column is "Select". Any changes made,
will be saved only to the units with this associated "Select" box checked
when "Apply Selected" is clicked. This applies to all 4 of the sections under
the Configuration Menu.
- Configuration > Input tab.
Figure 9
Some items have an automatic configuration option, such as "Automatic
channel numbering" shown in figure 10.
- Configuration > Transport tab.
Figure 10
- Configuration > Output tab.
Figure 11
The network configuration page allows a change to the Number assigned in
Step 5. This option also has an "Auto" assignment feature.
The "Auto" option will ask for confirmation since it will overwrite the settings
of all units set in Step 5 and the ordering will likely not be as the units were
placed in the rack.
- Configuration > Network tab.
Figure 12
10.
Change configuration of one unit:
Select "CONFIGURATION". Click on the Model name of the desired unit
and the page below will be shown. From this page you can change any
parameter of the configuration of the desired unit.
- Configuration > Advanced configuration
Figure 13