Technical Specifications - Televes T.OX Series Quick Installation Manual

Technical specifications

References
VIDEO
AUDIO
VIDEO + AUDIO
CLOSED CAPTIONING
INPUTS
EAS*
ASI
QAM
VIDEO
ENCODING
PROFILE
AUDIO
CLOSED CAPTIONING
QAM
OUTPUT
ASI
ALARMS / MONITORING / CONTROL
GENERAL
(1) 1080p resolution is only supported with MPEG-4 video codec.
(2) For correct CC operation at the output, the maximum output resolution is set to "Auto" or the input and output resolution are both "i" or both "p" at the same framerate.
Connectors
Connectors
Connectors
Connectors
Connectors
Trigger Vdc
Connectors
Format
Standard
Connectors
Output Format
Input Resolution
Input Framerate
Output Resolution
Output Aspect Ratio
Output GOP
Output Transport rate
Output Video bit rate
Output format
Output Sampling rate kHz
Output bitrate
Format
Connectors
Modulation standards
Frecuency Range MHz
Channel plans
Max output level dBmV
MER dB
Spurious dBc
Impedance Ω
I/Q Phase Error º
I/Q Amplitude Imbalance %
Connectors
Format
Local control
Local monitoring
Remote monitoring
Control
Power supply Vdc
Power disipation W
Operating Temperature ºF / ºC
563803, 563831*
2 sets - 3x RCA for Video (Y, Pb, Pr)
2 sets - 2x RCA for Analog Audio (L, R)
2 sets - 1x RCA for Digital Audio
2 sets - 1x Toslink for Digital Audio (Optical)
2 sets - 1xHDMI
2 sets - 1x RCA (CC in)
3x RCA (CVBS, L, R)
5-12 ( Dry Contact Closure)
1x BNC
DVB-ASI
ETSI EN 50083-9
"F" Female (loop-through combiner input)
MPEG-2 / H.264
480i, 480p, 576i, 576p, 720p, 1080i & 1080p
Supports auto-scan for input resolution
50Hz, 60Hz (all input Resolutions), 24Hz (only 1080p Input Resolution)
Same as input (Auto) or maximum selected output resolution
4:3, 16:9, and pass through
10, 12, 15, 16, 18, 20, 24 or 30
Variable
Variable
Dolby® Digital AC-3 or MPEG1 Layer 2
Variable
EIA-608, EIA-708
1x "F" Female
ITU-A: 16, 32, 64, 128, 256, 512, 1024 QAM
ITU-B: 64, 256 QAM
5 - 1002 (supports return path applications)
CATV STD, T_CHANNELS, Broadcast, Frequency
+50 (+40 with loop-through)
>40 (typ)
1x BNC
DVB-ASI
Full configuration with LCD handheld programmer
EAS status LED
LOOP status LED
QAM status LED
TEMP status LED
CH1/CH2 status LEDs
Ethernet status LEDs
Centralized web based remote control, management, alarms, and software upgrades
Daisy-chain integrated ethernet switch
32 to 113 / 0 to 45
(1)
48
(2)
-60
75
<1
<1
24
<20.4