Advertisement
Available languages
Available languages
Achieving the Right Fit
Note: Do not overtighten the straps.
Before putting on the mask
1. Sizing: Place the pillows cushion tips
2. Choose the cushion so the pillows gel bases
without any gaps.
Note: Do not push the pillows gel bases into your nostrils.
Putting on the Mask
3. Headgear: Pull the headgear on over your head
4. Pillows: Insert the pillows cushion tips
Adjusting the Mask
5. Headgear: Adjust the crown strap
ears similar to glasses.
Warning: The mask parts should be away from your eyes. Loosen the crown
strap
to move the frame side straps
K
6. Frame: Peel the tabs
the tabs against the straps to reattach
The mask should rest comfortably against your face
Tube Management (Optional)
7. Slip the mask tube
8. Position the mask tubing over your head
Using the Mask
9. Connect the flexible tubing (included with your CPAP or bi-level device) to the
swivel
.
G
10. Turn the therapy device on. Lie down. Breathe normally.
11. Assume different sleeping positions. Move around until comfortable. If there are
any excessive air leaks, make final adjustments. Some air leaking is normal.
Comfort Tips
The most common mistake is overtightening. The mask should fit loose and
comfortable. If your skin bulges around the mask or if you see red marks on your
face, loosen the straps.
Re-seat the mask by pulling it away from your face and gently setting back into
place.
A
K
away from the straps, adjust the length evenly, then press
I
through the headgear tube management loop
F
into your nostrils
A
sit comfortably under the nose
B
.
into your nostrils
. The headgear should sit just above the
away from your eyes.
I
.
.
and away from your eyes.
4
.
.
L
.
Advertisement
