Basic Setup; Starting Setup - Toshiba MW27H62 Owner's Manual

Basic setup

Starting setup

The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
Starting setup
1 Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press or to select your desired language,
then press ENTER.
2
Press or to select "TV" or "CABLE", then
press ENTER.
Press or to select "START", then press
3
ENTER.
If you select "CANCEL" and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
5V60101A [E]p19-22
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
CHANNEL PLAN
TV
CABLE
AUTO SETUP
START
CANCEL
19
4
Now the "CH PROGRAM" and "AUTO
CLOCK"starts.
After the starting setup is completed, the TV
channel appears on the screen.
Notes:
• The starting setup function will work only when you press
POWER for the first time.
• In "AUTO CLOCK" setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only "Time
of day" or "Local time zone".
• The process of "CH PROGRAM" may take 15 - 30 minutes
to complete, depending on your regional cable service.
• If you press CANCEL in the process of "CH PROGRAM",
you can do starting setup function again.
2/22/06, 1:03 PM
POWER
/
ENTER
CANCEL
CH PROGRAM
ANALOG CH SEARCH
STOP : CANCEL
CH PROGRAM
DIGITAL CH SEARCH
STOP : CANCEL
AUTO CLOCK
STOP : CANCEL
19