To Memorize Channels - Toshiba MW27H62 Owner's Manual

TV operation

To memorize channels

This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit's memory. To use this unit with an
antenna, set the TV/CABLE selection to the TV position. When
shipped from the factory, this selection is in the CABLE position.
TV/CABLE selection
1 Press MENU in the TV mode, then press
to select
2 Press or to select "TV/CABLE".
3 Press or to select "TV" or "CABLE".
TV - VHF/UHF channels
CABLE - Cable TV channels
4
Press MENU repeatedly until the menu screen is
cleared.
Note:
You cannot select "TV/CABLE" and "CH PROGRAM" features if
you set the channel to "VIDEO1", "VIDEO2" or "ColorStream".
28
5V60101A [E]p23-29
or
option.
LANGUAGE /
IDIOMA / LANGUE
CLOCK SET
AUTO CLOCK ON
STANDARD TIME
/ / / / MENU
DAYLIGHT
SAVING TIME
ON / OFF TIMER
TV / CABLE CABLE
CH PROGRAM
/ / / / MENU
DAYLIGHT
SAVING TIME
ON / OFF TIMER
TV / CABLE TV
CH PROGRAM
/ / / / MENU
28
Automatic memory tuning
1 Press MENU in the TV mode, then press
to select option.
2 Press or to select "CH PROGRAM".
3 Press to start "CH PROGRAM".
The unit will begin memorizing all the channels
available in your area.
4 When channel programming is complete, the
message "COMPLETED" appears.
5
Press CH or to view the programmed
channels.
2/22/06, 6:14 PM
or
LANGUAGE /
IDIOMA / LANGUE
CLOCK SET
AUTO CLOCK ON
STANDARD TIME
/ / / / MENU
DAYLIGHT
SAVING TIME
ON / OFF TIMER
TV / CABLE CABLE
CH PROGRAM
/ / / MENU
(Analog tuning)
CH PROGRAM
DIGITAL CH SEARCH
STOP : MENU
(Digital tuning)