Stereo And Second Audio Program (Sap) - Toshiba MW27H62 Owner's Manual

TV operation

Stereo and Second Audio Program (SAP)

The unit is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you
programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or
SAP which broadcasters can use to transmit a second language for bilingual
transmission or for other purposes.
Setting the SAP (analog mode)
1
Press MENU in the analog mode, then press
or to select
2 Press to select "SAP", then press
or
to select ON or OFF.
3 Press MENU repeatedly until the menu screen
is cleared.
Listening to stereo sound
When the TV is turned on or a channel selection is
made, the "STEREO" will appear on the screen. This
means that Stereo broadcasting is available. You can
enjoy stereo sound from the left and right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT
to change to mono sound. The noise should be
eliminated. Press it again to return to the stereo sound.
38
5V60101A [E]p30-39
option.
ADD / ERASE
SAP OFF
CLOSED CAPTION
V-CHIP
/ / / / MENU
or
ADD / ERASE
SAP OFF
CLOSED CAPTION
V-CHIP
/ / / / MENU
CH 013
STEREO
38
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, "SAP" will appear on the screen. This means
that the Second Audio Program broadcasting is
available.
To select desired sound
Press AUDIO SELECT to select the desired sound.
Broadcast SAP setting
MONO OFF
ON
STEREO OFF
ON
MONO+SAP OFF
ON
STEREO+SAP OFF
ON
2/22/06, 1:05 PM
AUDIO SELECT
/ / /
MENU
CH 013
STEREO SAP
CH 013
STEREO
Audio display
MONO
MONO
STEREO MONO
STEREO MONO
MONO
SAP
STEREO MONO
SAP